Ultrasonic cleaning machine is generated by the ultrasonic signal generator (power) generated by the high-frequency oscillation signal through the transducer (oscillator) into high-frequency mechanical oscillation and spread to the liquid, the ultrasound in the liquid density and phase forward radiation and produce Tens of thousands of tiny bubbles that form and grow in the negative pressure zone during propagation, and are rapidly closed in the positive pressure zone. In this process known as the "cavitation effect", the bubble closures can form Thousands of atmospheric pressure of the instantaneous high pressure, continuous production of high pressure like numerous small "explosion" constantly impact the surface of the object, so that the surface of the object and the gap in the dirt quickly peeled off, so as to achieve the purpose of cleaning.

Ultrasonic cleaning machine, although the effect of the traditional cleaning method is good, but because of the difference between power and frequency, we only have the right choice and proper use to achieve a multiplier cleaning effect. Since the cavitation is unevenly generated along the maximum sound pressure zone, when the cleaning object is in a stationary state in the lotion, the unevenness of the cleaning due to the unevenness of the cavitation is caused. Usually to overcome the occurrence of this phenomenon, small ultrasonic cleaning machine using the following two the most simple way:

1, move the cleaning object position

When the object is moved in the wash tank, the hole can act more uniformly on the surface of the object to be cleaned. The most effective way is to rotate the object so that the cavitation is applied to the different cleaning surfaces.

2, add or reduce a little cleaning solution

When the liquid level of the cleaning tank changes up and down, the position of the maximum sound pressure band of the hole also changes accordingly, which can overcome the inhomogeneity of cavitation.