If the ultrasonic cleaning machine is not operating properly, it will affect the ultrasonic cleaning machine product life. The essence of ultrasound for you to list a number of professional use: 1 ultrasonic cleaning machine installation. Please refer to the signal line, temperature sensor and electric control cabinet host ultrasonic cleaning machine cleaning machine installation manual connection between the ultrasonic driving line, heater control line and other lines, and the 380VAC power supply and installation of cleaning machine pipe, drain pipe and overflow discharge pipe. 2 ultrasonic cleaning machine water. Add appropriate amount of clean water to the cleaning tank, the height of the liquid surface will be cleaned by the parts to be cleaned, generally no more than 3/4 of the cleaning tank. 3 ultrasonic cleaning machine heating. Start the electric heating switch, the water temperature adjustment knob on the white scale line to the appropriate temperature (should be around 60 degrees Celsius). Cleaning machine in the use of the process, the maximum temperature should not exceed 70 degrees C. 4 ultrasonic cleaning machine cleaning agent. When the water temperature rises to about 4O DEG C, the parts cleaning agent is added into the cleaning tank (usually about 5kg once), and the water is slowly stirred to make it fully dissolved (at this time, the acoustic wave can be started or the bubbling device can be agitated. 5 pretreatment of ultrasonic cleaning machine. Before cleaning should use bamboo knife first dirt parts surface (such as dust cover the outer surface as there will be a lot of dust, the cylinder body parts in the shell will change curve of accumulated many thick and easy to clean and simple in sludge), in order to extend the service life of the cleaning liquid. Precision cleaning to ultrasonic, but the mud dirt processing ability is weak, so the pretreatment, should be the removal of dirt or mud mud.